Description:

SNOWMAT is ideal for quick installation for melting ice and snow on outdoor surfaces such as driveways, yards, etc. It can be installed directly into the hot asphalt (160 ° C) or in concrete, sand, or under the stone pavement.

The heating mat is two-core heating circuit, which is attached to a thin flexible fiberglass mesh. There are two width of heating mats - 40 cm for the creation of "dormitory" for cars and 80 cm for the protection of larger areas. SNOWMAT is supplied with cold terminal length 5 m, which is connected to an integrated connector.

Construction:

- Not stranded resistive wire
- XLPE working isolation
- Shielding using conductive polymer
- PVC outer sheath
- Outside diameter 7.5 mm
- Cold pin 5 m
 (2x1, 0 mm2)
- Supporting mesh fiberglass

Technical data:

- Output of heating mats from 1100 to 3300 W
- Specific output of 28 W / m
- Surface heating power of 300 W/m2
- Constant temperature resistance of outer jacket max 65 ° C
- Maximum temperature of hot asphalt 160 ° C
- Min. bend radius of 5 times the outer diameter of the heating cable
- Tolerance of resistance heating circuit -5 / +10%
- Construction voltage of 230 V